Terms and Conditions
As used in this QUOTATION, means Gear Motions, Inc., Nixon Gear Inc., Oliver Gear Inc. or any of its subsidiaries or divisions.
SELLER will furnish parts, gears, machinery or apparatus complete, including material, with all the machining, cutting, heat treat, and/or assembly operations being performed in accordance with specifications stated herein or on drawings.
MACHINING AND/OR CUTTING ONLY AND/OR HEAT TREAT ONLY AND/OR GEAR GRIND ONLY:
Buyer furnishes to Seller material and/or machined blanks ready for the operations as specified herein only.
2. ACCEPTANCE, GOVERNING PROVISIONS, AND CANCELLATION
No orders for products or services of Seller shall be binding upon the Seller unless accepted in writing by an authorized official at its Home Office. Any such order shall be subject to these terms and conditions of sale and acceptance of an order by the Seller shall be expressly conditioned on assent to such terms and conditions, which assent shall be deemed given unless Buyer shall expressly notify Seller to the contrary within 10 days after receipt of acknowledgment or confirmation of an order and in all events prior to the commencement of any delivery or performance of such order. No modified or other conditions will be recognized by Seller unless specifically agreed to in writing and failure of Seller to object to provisions contained in any purchase order or other communications from a Buyer shall not be construed as a waiver of these conditions nor an acceptance of any such provisions. Any contract for sale and these conditions and terms shall be governed by and construed according to the laws of the State of NEW YORK. No order accepted by Seller may be altered or modified by the Buyer unless agreed to in writing by the Seller; and no such order may be canceled or terminated except upon payment of Seller's loss, damage and expense arising from such cancellation or termination. Seller retains all other remedies against Buyer resulting from such cancellation or termination.
Delivery shall be F.O.B. Seller's plant. Delivery of products to a carrier at Seller's plant or other shipping point shall constitute delivery to Buyer and title shall pass at that time, regardless of freight payment. All risks of loss or damage in transit shall be borne by Buyer. Delivery promises are based on Seller's best judgment and Seller will attempt to fill orders at the agreed time. However, Seller shall not be liable for any damage claimed to result from any delay in delivery due to any cause whatsoever.
4. TERMS OF PAYMENT
All invoices are due and payable net thirty (30) days from date of invoice. Delays in transportation shall not extend terms of payment.
Should the Buyer's financial responsibility become unsatisfactory to the Seller, cash payment or satisfactory security may be demanded by the Seller and in default of such cash payment or satisfactory security, deliveries herein may be discontinued at the option of the Seller and a charge rendered covering the value of any partially finished articles that are being manufactured on this order or contract. Seller retains all other remedies it may have as a result of Buyer's unsatisfactory financial responsibility.
5. TAXES AND OTHER CHARGES
Any manufacturer's tax, retailer's occupation tax, use tax, sales tax, excise tax, duty, custom, inspection or testing fee, or any other tax, fee or charge of any nature whatsoever, imposed by any governmental authority, on or measured by any transaction between Seller and the Buyer, shall be paid by the Buyer in addition to the prices quoted or invoiced.
Seller warrants its products to be free from defects in materials and workmanship for a period of sixty days from date of shipment by Seller. If within such period any such product shall be proved to Seller's satisfaction to be so defective, such products shall be repaired or replaced at Seller's option. Seller's obligation upon such warranty shall be limited to such repair and replacement and shall be conditioned upon Seller's receiving written notice of any alleged defect within 10 days after its discovery and at Seller's option, return of such products or parts to Seller F.O.B. its factory or inspection by Seller at the location of the product or part. This warranty shall not apply to products or parts not manufactured by Seller or to products or parts which shall have been repaired or altered by others than Seller so as, in its judgment, adversely to affect the same, or which shall have been subject to negligence, accident, damaged by circumstances beyond Seller's control, or improper operation, maintenance or storage or to other than normal use of service. With respect to products and parts not manufactured by Seller, the warranty obligations of Seller shall in all respects conform and be limited to the warranty actually extended to Seller by the supplier.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILTY AND FITNESS FOR A PARTICULAR PURPOSE.
Seller shall not be subject to any other obligations or liabilities whatsoever with respect to products or any undertakings, acts or omissions relating thereto.
"The standards of AGMA will be used, where applicable, in the manufacture of gears, unless an express agreement to the contrary is reached between Buyer and Seller."
Seller guarantee(s) that all goods and every part and ingredient thereof sold to Buyer are produced in accordance with the Fair Labor Standards Act of 1938 and all amendments thereto.
Expenses incurred in connection with claims for which the Seller is not liable may be charged to the purchaser. No claim for correction will be allowed except for work done with the written consent of the Seller. Defects that do not impair service shall not be a cause for rejection.
The Seller shall not be liable under any circumstances, and anything to the contrary herein contained notwithstanding, for any direct, indirect consequential, contingent or incidental damages whatsoever arising from or resulting from the failure or improper functioning of any of its products.
Claims for shortages or other errors must be made in writing to Seller within 10 days after receipt of shipment and failure to give such notice shall constitute unqualified acceptance and waiver of all such claims by purchaser.
The Buyer will defend, at his own expense, and hold Seller harmless against any suit that may be brought against Seller by reason of the manufacture or sale of parts made to the Buyer's specifications.
No claim will be allowed for material mutilated by the Buyer or damaged in transit.
Where the Buyer furnishes the material, and it proves defective or involves expense not contemplated by the contract, the Seller will invoice all expenses involved.
When work of any kind is performed by Seller on material supplied by the Buyer, Seller shall not be liable for any cost of the material or other damages in event of spoilage or rejection for whatsoever cause or reason.
The Seller shall not be liable for loss of patterns, tooling, or merchandise by reason of circumstances beyond Seller's control.
No alterations in specifications, either for total quantity, delivery, mechanical, chemical or other details may be made without written consent of an authorized official of Seller and readjustment of price, instructions from the Buyer to suspend work or cancel shall entitle the Seller to an adjustment charge.
9. PRICING POLICY
Prices quoted are for acceptance within 30 days. Prices are based on running the full quantity for shipment at one time and to one destination unless otherwise agreed to in writing.
10. ERRORS AND VARIANCES
All clerical errors in Seller's quotations, acknowledgments and invoices are subject to correction.
11. OVERRUNS -- UNDERRUNS
All quotations are based on customer accepting overruns or under runs, not exceeding 10% of quantity ordered, to be paid for or allowed pro rata.
All prices listed provide for packing in accordance with the Company standard specifications.
13. DEVELOPMENT, DRAWING, PATTERN AND/OR TOOL CHARGES
Development, drawing, pattern and/or tool charges quoted in a proposal represent the Buyer's proportionate cost thereof and it is expressly understood that such drawings, patterns, and/or tools remain the property of the Seller, unless otherwise agreed in writing.
14. PATENTS, ETC.
Seller will have no responsibility whatsoever with respect to patent infringement if the infringing products shall have been made to the specifications of the Buyer or a third party or if such alleged infringement shall consist of the use of Seller's products for purposes other than those for which the same shall have been sold by Seller and Buyer shall indemnify Seller against all claims arising out of alleged infringement of patents, designs, copyrights, or trademarks with respect to any goods manufactured to Buyer's specifications.